Short Lead Time for magnetic drive gear pump - ELS Series Polymer Melts Gear Pump – Vowa Detail:
Booster Pump—— Low-pressure，Electric Heating
ELS Series Polymer Melts Gear Pump
ELS series melt gear pumps are suitable for reaction delivery and pressurization of high-temperature and high-viscosity polymer melts with lower output pressure, such as resin, chemical fiber and other industries. They are generally installed in the melt pipeline and used as a booster pump; The body gear pump has a certain self-priming performance, and can be used to transport and pressurize polymer materials under lower vacuum suction conditions.
The main materials that can be conveyed by the melt gear pump are:
Polymer melt
PET PBT PTT
PA6 PA66 PA12
PE LDPE LLDPE HDPE HMWPE
PP EVA PB
PB PS HIPS ABS SAN
PC PEK PMMA POM
TPU PLA PBS
Other stock solutions, solutions, glues, oligomers, prepolymers, etc. in the polymer material industry;
It can also be used to transport hot melt adhesives, asphalt, paints, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, polyols and other materials that do not contain particulate impurities.
Technical data:
Viscosity ： 1E-3～30，000Pa•s （1～30,000,000cP）
Suction side pressure ：（-0.00～-0.03MPa）～5MPa
Discharge side pressure ： 0～5MPa
Differential pressure ： 5MPa
Temperature ： ≤350℃
Heating ： Fully Jacketed
HT medium pressure ： ≤1.6MPa
Installation method
ELS series melt gear pumps are generally installed in the melt pipeline at the bottom of the reactor and used as booster pumps or metering pumps. They are driven by motor + reducer + universal coupling, or motor + reducer + flexible coupling. Shaft drive. Melt gear pump is a positive displacement forced delivery pump. The output flow of the pump can be adjusted by adjusting the speed of the pump. Frequency conversion speed regulation is recommended, which can realize the nearly linear flow output of the gear pump.
Main structure of gear pump:
Rotor type: helical or spur gear
Heating method: Heat medium heating
Sealing structure:
■ Dynamic melt seal + packing seal
■ Mechanical seal
■ Dynamic seal with cooling melt
■ High temperature resistant packing seal
Main structural materials of melt gear pump:
Pump casing: stainless steel/alloy steel/corrosion-resistant alloy
Gear: Nitrided steel/tool steel/stainless steel + coating/corrosion resistant alloy
Bearing: tool steel/copper alloy/stainless steel + coating/corrosion resistant alloy
Pump size and Technical data
|
Model |
cc/r |
Inlet |
Outlet |
Max. flow rate m3/h |
Temp |
|
|||
|
Low |
Medium |
High |
Ultra high |
|
|||||
|
＜50Pa.s |
50～200Pa.s |
200～2000Pa.s |
＞2000Pa.s |
|
|||||
| ELS-5 |
5 |
Vacuum -0.05～5.0 |
≤5.0 |
0.041 |
0.027 |
0.019 |
0.012 |
≤350℃ |
|
| ELS-10 |
10 |
0.081 |
0.054 |
0.038 |
0.024 |
|
|||
| ELS-20 |
20 |
0.162 |
0.108 |
0.076 |
0.049 |
|
|||
| ELS-32 |
32 |
0.259 |
0.173 |
0.121 |
0.078 |
|
|||
| ELS-50 |
50 |
0.405 |
0.270 |
0.189 |
0.122 |
|
|||
| ELS-75 |
75 |
0.527 |
0.365 |
0.243 |
0.162 |
|
|||
| ELS-100 |
100 |
0.702 |
0.486 |
0.324 |
0.216 |
|
|||
| ELS-160 |
160 |
1.123 |
0.778 |
0.518 |
0.346 |
|
|||
| ELS-200 |
200 |
1.404 |
0.972 |
0.648 |
0.432 |
|
|||
| ELS-250 |
250 |
1.620 |
1.080 |
0.675 |
0.473 |
|
|||
| ELS-355 |
355 |
2.3 |
1.5 |
0.9 |
0.7 |
|
|||
| ELS-500 |
500 |
3.2 |
2.2 |
1.2 |
0.9 |
|
|||
| ELS-750 |
750 |
4.9 |
3.2 |
1.8 |
1.4 |
|
|||
| ELS-1000 |
1000 |
5.4 |
3.8 |
2.2 |
1.9 |
|
|||
| ELS-1200 |
1200 |
6.5 |
4.5 |
2.6 |
2.3 |
|
|||
| ELS-1600 |
1600 |
8.6 |
6.0 |
3.5 |
3.0 |
|
|||
| ELS-2000 |
2000 |
10.8 |
7.6 |
4.3 |
3.8 |
|
|||
| ELS-2500 |
2500 |
10.8 |
8.1 |
4.7 |
4.1 |
|
|||
| ELS-3150 |
3150 |
13.6 |
10.2 |
6.0 |
5.1 |
|
|||
| ELS-4000 |
4000 |
13.0 |
10.8 |
7.6 |
6.5 |
|
|||
| ELS-6300 |
6300 |
20 |
17 |
10 |
9 |
|
|||
| ELS-8000 |
8000 |
22 |
17 |
13 |
12 |
|
|||
| ELS-9000 |
9000 |
24 |
19 |
15 |
13 |
|
|||
| ELS-12000 |
12000 |
32 |
26 |
18 |
16 |
|
|||
| ELS-18000 |
18000 |
49 |
39 |
27 |
24 |
|
|||
| ELS-25000 |
25000 |
68 |
54 |
38 |
34 |
|
|||
| ELS-38000 |
38000 |
103 |
82 |
57 |
51 |
|
|||
| ELS-54000 |
54000 |
146 |
117 |
82 |
73 |
|
|||
| ELS-80000 |
80000 |
216 |
173 |
121 |
108 |
|
|||
| Please consult the manufacturer for larger or smaller specifications | |||||||||
Product detail pictures:
Related Product Guide:
With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for Short Lead Time for magnetic drive gear pump - ELS Series Polymer Melts Gear Pump – Vowa, The product will supply to all over the world, such as: Johannesburg , Macedonia , United Arab Emirates , Our company is continuing to serve customers with high quality, competitive price and timely delivery. We sincerely welcome friends from all over the world to cooperate with us and enlarge our business. If you are interested in our products, please feel free to contact us. We would love to provide you with further information.
By Poppy
from Tunisia
- 2017.09.22 11:32
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Honorio
from Norwegian
- 2017.08.28 16:02
-
IOS Certificate melt booster pump - HK Series ...
-
China Manufacturer for EHS series polymer gear ...
-
OEM China High pressure gear pump - HK Series ...
-
Wholesale OEM/ODM types of gear pump - GHK Ser...
-
Quality Inspection for 2 stage gear pump - MED...
-
China New Product high viscosity gear pump - N...