Low MOQ for melt gear pump - G Series Polymer Melts Gear Pump – Vowa
Low MOQ for melt gear pump - G Series Polymer Melts Gear Pump – Vowa Detail:
G series melt gear pump is especially suitable for high temperature and high viscosity polymer melt reaction transportation requiring high output pressure, such as resin, chemical fiber and other industries. It is generally installed in the lower part of the reactor to make feed pump. This series of melt gear pumps have good self-priming performance, and can be used for conveying and pressurizing polymer materials under vacuum reaction conditions.
The main materials that can be transported by melt gear pump are as follows:
PET PBT PTT
PA6 PA66 PA12
PE LDPE LLDPE HDPE HMWPE
PP EVA PB
PB PS HIPS ABS SAN
PC PEK PMMA POM
TPU PLA PBS
Other stock solutions, solutions, glues, oligomers, prepolymers, etc. in the polymer material industry;
It can also be used to transport hot melt adhesives, asphalt, paints, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, polyols and other materials that do not contain particulate impurities.
Viscosity ： 1～30，000Pa•s （1,000～30,000,000cP）
Suction side pressure ： vacuum（-0.05～-0.09MPa）～4MPa
Discharge side pressure ： 0～35MPa
Differential pressure ： 25MPa
Temperature ： ≤350℃
Heating ： Hot coal heating
HT medium pressure ： ≤1.6MPa
G series melt gear pumps are generally installed at the bottom of the reactor and are driven by a motor + reducer + universal coupling. The melt gear pump is a positive displacement forced delivery pump. The pump output flow can be adjusted by adjusting the pump speed. It is recommended Using frequency conversion speed regulation, can realize the nearly linear flow output of the gear pump.
Main structure of gear pump：
Rotor type: helical or spur gear
Heating method: hot coal heating
■ Dynamic melt seal + packing seal
■ Mechanical seal
■ Dynamic seal with cooling melt
■ High temperature resistant packing seal
Main structural materials of melt gear pump:
Pump housing: stainless steel/alloy steel/corrosion-resistant alloy
Gear: Nitrided steel/tool steel/stainless steel + coating/corrosion resistant alloy
bearing: tool steel/copper alloy/stainless steel + coating/corrosion resistant alloyG
Pump size and Technical data
Max. flow rate m3/h
Ultra high viscosity
|Please consult with the manufacturers for the bigger or lower specification|
|The series of pump can be provided in jacket-free type, such as T-G-xxx|
The flow rate of the melt gear pump is related to the working speed, material viscosity, and working pressure. Please consult the manufacturer for specific selection.
Product detail pictures:
Related Product Guide:
As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we're the lowest around for Low MOQ for melt gear pump - G Series Polymer Melts Gear Pump – Vowa, The product will supply to all over the world, such as: Provence , Saudi Arabia , Angola , Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we have insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
By Michelle from Qatar - 2017.06.16 18:23
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Darlene from Iran - 2017.03.08 14:45